topic path

Air Micrometer Products Lineup

NIDEC TOSOK transferred Air/Electric Gauge business to NIDEC-SHIMPO CORPORATION on June 1, 2012.

Inside Head for Air Gage

Offering wide range application to use from micro small diameter (1.2Φ) to bore measuring of car engines.

Features
  • Easy operation
  • Always the same measuring result. Not rely on inspectors' skill.
  • Good for mass products' inspection due to faster inspection cycle time.

Inside head for air gage

 Measuring way and featuresLocation of Nozzle / Carbide point, main usageDrawings and product specification
PA Type
  • This is a type which blows air against the work piece.
  • It is mainly used for the measurement of through hole.
  • The nozzle is at 8 to 20 mm beyond the tip of the probe. It is mainly used for the measurement of through hole.
PDF(286KB) PDF
PB Type
  • This is a type which blows air against the work piece.
  • It can make deeper measurement than conventional PA type.
  • The nozzle is at 3 to 4 mm beyond the tip of the probe. It is mainly used for the measurement of through hole.
PDF(474KB) PDF
PC Type
  • This is a type which blows air against the work piece.
  • It can make deeper measurement than conventional PB type.
  • The nozzle is at 2 mm beyond the tip of the probe. It is mainly used for measuring a small hole of the through hole.
PDF(423KB) PDF
PKA Type
(Indirect gage)
  • This is a indirect type which make non-contact measurement using solid-carbide measurement point.
  • It is used mainly with the surface roughness being not less than 6 S ,or the width of the surface to be measured being not more than 4 mm.
  • Carbide point is at the middle of the probe.
PDF(307KB) PDF
PKB Type
(Indirect gage)
  • This is a indirect type which make non-contact measurement using solid-carbide measurement point.
  • It is used mainly with the surface roughness being not less than 6 S ,or the width of the surface to be measured being not more than 4 mm.
  • Carbide point is at the tip of the measurement head.
PDF(318KB) PDF

Outside Head for Air Gage

Designing the most optimal measuring nozzle to fit customers' requirement, such as V -shape nozzle, Ring -type nozzle in accordance with the shape of work piece.

Features
  • Easy to measure
  • Regardless inspectors' measuring skill, same result can always be obtained.
  • Good solution for mass products because of faster rate.

Outside head for air gage

 Measuring way and featuresMajor purposeDrawings and product specification
PO Type
  • Shape to pinch work pieces.
  • One of the most popular measuring unit.
  • Measuring outside diameter of the all sort of cylindrical products.
PDF(276KB) PDF
POT Type
  • Shape to pinch work pieces.
  • Installing long-life solid carbide on V-surface so as to elongate durability.
  • Due to Anti-abrasion, this is good to use for all number of objects for longer life.
POK Type
  • This is a indirect probe which uses a solid carbide lever.
  • It is used mainly with the surface roughness being not less than 6 S and the width of the probe not more than 5 mm.
PDF(327KB) PDF
POR Type
  • This is a type of measurement in which a work pieces is inserted into the ring.
  • It is often used when work pieces are smaller.
PDF(327KB) PDF

Gage Head for Air Gage

Multiple usage to check some measuring points at the same time.

Features
  • Improve measuring rate.
  • Possible to measure the points on which conventional hard gage can not do it.
  • Stable measuring result can be obtained.

Gage Head for Air Gage

Product NameFeaturesDrawings and product specification
6 air-jet type cylinder
Height / slot width measuring unit
Measuring the height and slot width of cylinder at the same time.PDF(2.5MB) PDF
Single air-jet type piston Coaxiality measuring unitMeasuring piston coaxiality.
5 air-jet type piston outside diameter / squareness / thickness measuring unitMeasuring at 5 points of piston outside diameter , squareness and thickness at the same time.
4 air-jet type shaft outside diameter measuring unitMeasuring at 4 points of shaft outside diameter.
3 air-jet type shaft squareness measuring unitMeasuring shaft squareness.
4 air-jet type cylinder slot width measuring unitMeasuring at4 points of cylinder slot width.
3 air-jet type vane heigh / thickness measuring unitMeasuring vane at 3 points of the height and at one point of thickness.
2 air-jet type vane squareness measuring unitMeasuring vane squareness.
8 air-jet type upper BRG inner diameter parallelism measuring unitMeasuring at 4 points of upper BRG inner diameter, parallelism and squareness.

Master for Air Gage

Provide master gage with high precision and reliable.

Features
  • Possible to produce multi purpose master for various measuring.
  • Special master can be produced to fit customers' specifications.

Master Gage

Product NameFeaturesDrawings and product specification
Master ring Gage The master gage (basic gauge)used in measurement comparison is not only head treated but also sub-zero-treated with regard to the material under the sufficient control,
For this gauge, for ne ceramics master gauges are also available. Please feel to consult with us regarding coating or material improvement for be better wear resistance.
PDF(332KB) PDF
Master plug Gage The master gage (basic gauge)used in measurement comparison is not only head treated but also sub-zero-treated with regard to the material under the sufficient control,
For this gauge, for ne ceramics master gauges are also available. Please feel to consult with us regarding coating or material improvement for be better wear resistance.
PDF(345KB) PDF

Display

Provide with most optimal display from wide product line up of the various kind of analog and digital display.

Features
  • Optimal for customers' budget as wide pricing range.
  • Digital type display can transfer the data to outside.
  • Easy operation and maintenance

Display

Product NameFeaturesProduct specification
FT-5000
(Flow Type Air Gage
[FT5000 Series])
FT-5000
  • Low cost and good appearance.
  • The enlarging and indicating mechanisms have no wearableparts, enabling high precision to be maintained long.
  • The fl oat response is quick and stable.
  • The high pressure air blows off dust and oil from the work piece, assuring accurate measurement.
  • Because of non-contact measurement, there is no fear of the work piece being damaged or bent. The air micrometer is especially effective in measuring inside diameters.
  • The air micrometer is free from hysteresis loss.
PDF(733KB) PDF
CAG-1000,2000
(Air Gage[CAG Series])
CAG-2000
  • The 3-color color bar displays makes it easy to read measurement and judgment results.
  • The 8-digit alphanumeric display of measurement values and names makes operation easy.
  • Push buttons and external signals enable automatic performance of large scale and small scale master coordination.
  • The main unit having a width of 50mm contains two built-in A/E converters, and measurement and evaluation of a total of three parameters, consisting of measurement at two locations along with their arithmetic processing result, can be performed with a single unit.
  • Data output to the PC and printer is performed using the standard-equipment serial communication function.
  • Data saving, data processing and input to spreadsheet software (EXCEL, etc.) is possible.
  • By switching programs, 10 types of settings, and saving and switching of master values can be done.
PDF(1.6MB) PDF
MD-14L,24L,14LL
(Dial Type Air Gage [MD Series])
MD-14L,24L,14LL
  • The pneumatic micrometer offers all the advantages of non-contact measurement, high magnification, remote measurement, high efficiency, etc.
  • The high pressure air type allows for a wide clearance between the measuring probe and object, hence offers a wide measuring range and prolongs the probe life.
  • The precision regulator and amplifier relay assures accurate measurement, stable indication, and very quick response.
  • Magnification can be adjusted over a wide range, and any desired measuring range can be obtained simply by changing the scale board.
  • Not only the simple type but also the duplex type is very compact and easy to use.
  • The dual indicator has two pointers (black and red),facilitating the correlation of dimensions of two parts to be seen easily.
  • As the probe nozzle, even a nonstandard one can be used.
PDF(689KB) PDF
MG2000,2200
(Panel Type Air Gage [MG Series])
MD-14L,24L,14LL
  • Displays a combination of Analog and Digital result.
  • Desired replacement of MD-24M.
  • One touch master coordination.
PDF(632KB) PDF
DAG-2000
(Digital Air Gage[DAG2000])
DAG-2000
  • Minimum resolution 0.01μm(option)
  • Result identify action can be displayed in different colors:
    • Main display : three color (green, orange and red) digital display
    • Result lamps:5 lamp result displays: OK (green), -OK, +OK (orange), -NG, +NG (red)
  • Master coordination can be performed automatically by push button or an external signal(optional).
  • Can output data(measurement data/measurement results) to computers and printers, by means of a serial communication function, provided standard.
  • Built-in multi-range A/E converter; can be adjusted to all ranges simply by panel switches.
PDF(758KB) PDF
DAG-2200
(Digital Air Gage [DAG2200])
DAG-2200
  • Industry`s for rest pneumatic micrometer with a 2-ch bar display.
  • Taper,2-row,parallerism and pitch measurement for better operation ability.
  • Colored bar display that shows OK/NG.
  • Single-button switching of display positions of measurement and calculation results.
PDF(736KB) PDF
Contact Us
Sales Department.2

Page Top